Connects to your vehicles fusebox. activates parking mode

Installation of the hardwiring cable to your vehicle’s fuse panel enables the built-in Parking Surveillance Mode in your THINKWARE Dash Cam, while you are away from your vehicle. All Thinkware Dashcams can then monitor your vehicles Battery and will shut down if it detects it getting low. Compatible with all THINKWARE Dash Cam models except for the M1 Mostorsport Cam or F790 Dash Cam

Full HD 1080P infrared image quality 140 degree viewing angle 0.6M Cable length Dimensions: 61mm (W) x 33mm (D) x 27mm (H)

Increase the duration of the Parking Surveillance mode of your Thinkware Dash Cam with the iVolt Mini External Battery. It allows your Thinkware dash cam to remain in Parking mode for up to 20 hours, or 16 hours with a rear cam added and even longer dependent on the camera and mode used. Compatible with all THINKWARE Dash Cam models. Please note that this requires the Hardwired version of the Dashcam

Increase the duration of the Parking Surveillance mode of your Thinkware Dash Cam with the iVolt PRO External Battery. With its 8.5 A high-speed charging, the external battery is capable of operating a dash cam for up to 27 hours on approximately 50-minute charge. Max recording time will vary by the Thinkware Dash Cam in use. Supports parallel installation of two external batteries to expand battery capacity. Compatible with all Thinkware Dash Cam models.

In some circumstances you may need to extend the Rear cable length in order to rear the optimum rear camera placement, should you need to do this Thinkware have the below the rear camera extension cables available