Increase the duration of the Parking Surveillance mode of your Thinkware Dash Cam with the iVolt PRO External Battery. With its 8.5 A high-speed charging, the external battery is capable of operating a dash cam for up to 27 hours on approximately 50-minute charge. Max recording time will vary by the Thinkware Dash Cam in use. Supports parallel installation of two external batteries to expand battery capacity. Compatible with all Thinkware Dash Cam models.

In some circumstances you may need to extend the Rear cable length in order to rear the optimum rear camera placement, should you need to do this Thinkware have the below the rear camera extension cables available

Designed for easy installation, the OBDII cable enables built-in Parking Surveillance Modes; Motion Detection, Impact Detection, Time Lapse Mode*, Energy Saving Mode* Compatible with all Thinkware Dash Cams, except for the F790 model. *Available on Select Dash Cams

Connects to your vehicles 12v accessory (cigarette lighter) socket for easy installation

The 12V Power Cable connects your THINKWARE Dash Cam to your vehicle’s interior Accessory power outlet Compatible with all THINKWARE Dash Cam models except for the F790 and M1.

Lens flares, light reflections, and windshield glares can significantly impact the quality of your dash cam footage. Eliminate these issues caused from moments of extreme brightness by easily installing THINKWARE’s Circular Polarizing (CPL) Filter. Simply use the guide points located on the CPL Filter to install this on any THINKWARE Dash Cam for enhanced colour clarity, and improved light exposure. Reduce glare and increase the quality of your dash cam footage today! Compatible with ALL Thinkware Dash Cams